MaxTronic Orion 410ST Скачать руководство пользователя страница 83 | Manualshive

Страница: 83 / 100

MaxTronic Orion 410ST Скачать руководство пользователя страница 83

Maxtronic Orion 410ST User Guide

73

Backup-sync

Backup-sync

This function provides the Orion 410PT NAS System with the ability to access client data

through corresponding network protocols. SMB and AFP are supported.
The duplicate client data can be loaded into the system’s specified data volume as a copy of

data backup.

Options

•

Server list refresh interval

: Select the

server list refresh interval from the drop-
down menu. The default is set at half an hour.

•

Allow users select client code page

: Check

to allow users to select client code page for
each job.

•

Log Level

: Select the log level from the

drop-down box.
– Least, only error and statistics result.
– General information, recommended.
– Higher, including directories information.
– Highest: Debug information, including all processed files.

The system default is Level 1, since both Level 2 and 3 will contain a lot of data, especially if

the source directory is large.

•

Modify

: Click to save all changes.

«
...
81
82
83
84
85
...
»

Содержание Orion 410ST





































































































Отзывы:

Нет отзывов