MaxTronic Orion 410ST, Руководство пользователя

Страница: 18 / 100

8
Maxtronic Orion 410ST User Guide
Ha
rd
wa
re
I
n
stal
la
tio
n
7. Push back the handle of the HDD caddy.
8. Lock the HDD caddy with the key. Keep the key
safe for future use.
9. Start configuration either with the front control panel or the
browser interface
.
The original caddy order need not be the same when re-inserting the
caddies back into the Orion 410ST.
Do not install the HDD(s) into the Orion 410ST NAS System
while it’s powered off under any conditions.
The following are exceptions:
1. The HDD(s) have been initialized by the same Orion 410ST
and have been performing daily routine tasks.
2. Performing “Disk Roaming” procedure to reduce system down
time.
To perform “Disk Roaming“:
a. Power off the old NAS system.
b. Execute Factory Default on the new NAS system and then
power it off.
c. Remove the HDD(s) from the old NAS system.
d. Insert the HDD(s) into the new NAS system. Please be sure
the model and firmware of the new system are the same as
the old one.
e. Power on the new NAS system and Disk roaming is com-
plete.
Hot plugging previously initialized HDD(S) will overwrite existing user
configurations, RAID settings, and any data in the drive.