MaxPro PROFESSIONAL MPBMS255L, Руководство пользователя

Страница: 9 / 46

6
GB
6.Do not use a saw blade which is cracked, deformed or dull.
7.Only use saw blades with a hole diameter which fits the tool spindle without play; never use reducers or
adapters t o fit la rge-hole saw blades.
8.Protect accessories from impact, shock and grease.
DURING USE
1.Do not force the tool; apply light and con tinuous p ressure.
2.K eep fin gers, hands and arms away from the rota ting s aw blade.
3.Push spindle-lock bu tt on only when tool is at a stands till.
4.When slo ttin g, ensure that the saw blade does not get jammed in the work piece.
5.If the saw blade becomes blocked, switch o ff the tool immediately and disconnect the plug; only then
remove the wedged work piece.
6.In case of jamming or electrical or mechanical malfunction, immediately switch o ff the tool and
disconnect the plug.
7.If the cord is damaged or cut through while working, do not touch the cord, but immediately disconnect
the plug.
8.Never use the tool when cord is damaged; have it replaced b y a qualified pe rson.
LASER RADIATION
1.Do not look into the laser beam (laser radia tion).
2.Do not point the laser beam at persons or animals.
3.Do not use any magnifying op ti cal tools (such as magnifying glasses, telescopes, or binocular s)
to view the laser beam.
4.Do not operate the tool in the pr esence of flammable liquids, gases or dust.
5.Do not operate the tool with children around.
6.Do not replace the installed laser with another laser type.
AFTER USE
1.A ft er switching o ff the tool, never stop the rota tion of the accesso ry by a lateral force applied against it.
2.Only remove cut-o ff s or other parts of the work piece from the cu tting area when all moving parts have
come to a complete stands till.
3.The saw blade becomes very hot during use; do not touch it before it has cooled down WHEN
CONNECTING NEW 3-PIN PLUG (U.K. ONL Y):
4.Do not connect the blue (= neutr al) or brown (= liv e) wire in the cord of this tool to the earth terminal of
the plug.
5.If for any reason the old plug is cut o ff the cord of this tool, it must be disposed of safely and not le ft
una tt ended. .
OPERATING INSTRUCTION
1.Upper handle
2.Guard release knob
3.Saw blade
4.Lower guard
5.Foot base
6.Base
7.Table lock handle
8.Mitre angle scale
9.Turning table