MaxPro PROFESSIONAL MPBMS255L, Руководство пользователя

Страница: 10 / 46

7
GB
10.Side support bar
11.Table fence
12.Bevel angle scale.
13.Bevel angle scale pointer.
14.Dust bag
15.On/O ff Switch
16.Dust bag connector.
17.Locking bolt
18.Bevel lever handle
19.Rear support
20.Working clamp
21. Upper handle
22. Allen key
23. Saw sha ft lock
24. Upper guard
25. Cover plate
1.Rear support ( Fig 1,2 )
The rear support (19) are under the base (6).
Deploy the rear support and (19) engage them correctly into the clips (19a) provided at the bo tt om plate of
the machine.
2.W orking position.( Fig 3,4,5)
Low er the handle (1) and pull the locking bolt (17) out of its locking position.
-When the locking bolt (17) is unlock ed, the handle (1) will lift au toma tic to the ma ximum upper position
Guide the handle while it lift t o the upper position.
-A ft er each job lock the machine in the tr ansport position b efore store the machine.
Press the handle (1) slo wly till it reach the lowes t position, p ress the locking bolt (17) and slowly guide the
handle (1) in upwards dir ection till the lock by the locking bolt (17)
3.Support ba r. (Fig 6+7)
-Loosen the locking bolts (10a) position on the base (6)
-Insert the end of the support (10) into the holes at the base (6)
Tighten the locking bolts (10a)
4.In stall work piece clamp (Fig. 8)
The work piece clamp (20) can be mounted at both side of the base.
Note : If the mitre or bevel angle is adjusted and the motor housing will swing to the le ft side, you can
mount the work piece clamp at the right side.
-Loosen the locking bolts (20a) located at the support bar (20b)
-Insert the work piece clamp (20f) at the holes of the support bar (20b)
-If the w ork piece clamp is positioned correctly , tig hten the locking bolts (20a)
5.Du st c ollection bag.(Fig 9 )
Squeeze the metal clamp (19a) at the dust c ollection bag (19) and m ove it over the dust c onnection (21)
6.In stall of a sta tiona ry machine (Fig. 10)
This machine is used as a sta tiona ry machine only, Never use this machine as a mobile tool.