Hi-T2
Centralised controller
17
Figure 19. “Programs” page.
From this page you can separately set the weekly program of each chiller and fan coil zone. You can also program the legionella
cycle and the production of domestic hot water, if enabled (see Paragraph 4.6.4).
3.6.4
SPECIAL FUNCTIONS PAGE
Press the button to enter the "Special Functions" page (see Paragraph 4.12).
3.6.5
CONFIGURATION PAGE
Press the button to enter the "Configuration" page.
Figure 20. “Configuration” page.
From the configuration screen, you can access the User-Keyboard setup menu, the Service menu and the Manufacturer menu.
Pressing each of these items; a numeric keypad will appear for entering a password.
Figure 21. Password entry.
The user password is set by default to "0" (modifiable).
3.6.5.1
USER MENU – KEYBOARD SETUP
To access the user menu the user password must be set up (modifiable):
0
.
From here you can:
•
Set the date and time by pressing on “Clock” key (it appears on the screen shown in Figure );
•
set the language by pressing on “Language”;
•
access the setup of the keyboard, pressing on “Parameters”.
PROGRAMS
Chiller cooling
Chiller heating
Zone cooling
Zone heating
Legionella disinfection
Sanitary
CONFIGURATION
User menu
Service menu
Manufacturer menu
Password:
123
OK
