Hi-T2
Centralised controller
13
3.4.2
FAN COIL PAGE
From the main page, by touching the fan coil symbol (sensitive area number 3, Figure 5), you can access the networked fan coils
screen.
From here you may access all the information on operation of the individual fan coils, identified by their zone and identification
number of the single fan coil.
Figure 12. Information and fan coil page sensitive areas.
Sensitive areas (indicated by red boxes in the figure) in this page are:
1.
Active alarms of the displayed unit
2.
Fan coil name (the name of the zone the fan coil belongs to and the identification number of the fan coil are displayed;
every time you press the name area, you go to the next fan coil unit in the network)
3.
4. and 5.
Navigation bar
The information on the fan coil page is given below:
6.
Detected temperature in the fan coil zones (the average value of the fan coil temperatures in the area)
a.
Air temperature (°C)
b.
Inlet water temperature (°C)
7.
Status and operating mode related to a specific fan coil (with fan speed)
8.
Active/activable functions (in the scroll bar on the left)
By pressing on the configuration button (Sensitive area
4
), you can access the fan setting. Ventilation is modified by zone. Therefore
changing ventilation of 1 fan coil of a certain area applies the modification to the entire zone. The fan setting page looks like this:
Figure 13. Fan speed configuration.
The selectable speeds are:
•
Minimum speed
•
Medium speed
•
Maximum speed
6
8
7
1
2
3
4
5
Air -5.5°C
Water 30°C
Status
ON
Mode
Zone 1
