Matrox Mura D-Series, Руководство по сборке системы

Страница: 70 / 88

70 Matrox Display Wall – System Builder’s Guide
Supermicro C9Z390-PGW
Configurations
Performance considerations with D-Series controller
D-Series based controllers Third-party based controllers
Validated Yes No foreseeable compatibility issues
Maximum number of cards
supported
4
Maximum supported
Mura IPX Series
3
Maximum supported
D-Series
4
Motherboard Supermicro C9Z390-PGW
Chipset Intel Z390
Processor Intel® Core™ i7-9700K CPU @ 3.60 GHz, 3600 MHz, 8 Core(s)
Heatsink (for CPU) LGA 1151
System BIOS version 1.0A, 2018-04-21
System memory 32 GB DDR4
Chassis Supermicro CSE-842XTQ
Power supply 600 W redundant power supply
PCIe expansion slots

4 PCIe x16 3.0 slots (x16 mechanical, x16 / x8 electrical)
Notes  The chassis fans must run at full speed. To change the fan speed, go to the system BIOS main page 
H/W
Monitor

Fan Control Setting

and select
Full Speed
.
 In the system BIOS main page, go to
Advanced

Graphics Configuration
 and set:

Primary Display
to
IGFX

Internal Graphics
to
Enabled

In the system BIOS main page, go to
Advanced

PCIe/PCI/PnP Configuration

Option ROM execution

and set
Above 4G MMIO BIOS Assignment
to
Enabled
.

On-board console support with D-Series controllers. Requires 3.05 drivers or later.
Slot
D-Series based controller Third-party based controller
Main Options Main Options
CPU SLOT1 PCI-E 3.0 X8(IN X16) D1480 B Third-party graphics hardware
CPU SLOT3 PCI-E 3.0 X 16 MURAIPXI-E4JF A, B MURAIPXI-D4JF A
PCH SLOT4PCI-E 3.0x1 N/A N/A N/A N/A
CPU SLOT5 PCI-E 3.0 X8(IN X16) D1480 A, B Third-party graphics hardware A
CPU SLOT7 PCI-E 3.0 X 16 MURAIPXI-E4JF A, B MURAIPXI-D4JF A
Slot Connectivity Configuration 1 Configuration 2
CPU SLOT1 PCI-E 3.0 X8(IN X16) x16 / x8 B* B*
CPU SLOT3 PCI-E 3.0 X 16 x8 / x0 A A
PCH SLOT4PCI-E 3.0x1 x1 N/A N/A
CPU SLOT5 PCI-E 3.0 X8(IN X16) x16 / x8 A B*
CPU SLOT7 PCI-E 3.0 X 16 x8 / x0 A A