Matrox Mura D-Series, Руководство по сборке системы

Страница: 46 / 88

46 Matrox Display Wall – System Builder’s Guide
Advantech PCE-5B19 with PCE-7131 / PCE-7129
D-Series based controllers Third-party based controllers
Validated Yes No foreseeable compatibility issues
Maximum number of cards
supported
15
Maximum supported
Mura IPX Series
14
Maximum supported
D-Series
4
Motherboard Advantech PCE-7131 / PCE-7129 (SHB)
Advantech PCE-5B19 (Backplane)
Chipset Intel C246 (PCE-7131 SHB)
Intel C236 (PCE-7129 SHB)
Processor Advantech PCE-7131

Intel® Xeon®E-2278GE CPU@ 3.30 GHz, or

Intel® Core™ i7-9700E CPU @ 2.60GHz
Advantech PCE-7129

Intel® Core™ i7-6770S, 3.40 GHz
Heatsink (for CPU) 2U CPU cooler
System BIOS version 5.13, 2020-04-09 (PCE-7131)
5.12, 2018-03-13 (PCE-7129)
System memory 32 GB DDR4 ECC Memory (Intel Xeon E-2278GE)
32 GB DDR4 non-ECC memory (Intel i7-9700E/i7-6770S)
Chassis Advantech IPC-623 4U rack mount

Chassis Part#: IPC-623BP-1KZC (for single power supply; includes chassis, fans and 1200W power
supply)
Or
Rackmaster 20 slot Chassis

Chassis Part#: 010-0163 (includes chassis, fans, and 800 W redundant power supply)

Chassis Part#: 010-0165 (includes chassis, fans, and 1200 W single power supply)
Power supply  850 W / 1200 W single power supply with Advantech IPC-623 Enermax 1200 W (Part#: EPF1200EW; for
Advantech IPC-623BP-00XBE purchased separately)
 EVGA 850 W (Part#: 220-G3-0850-X1; for Advantech IPC-623BP-00XBE purchased separately)

1200 W (Advantech part # 96PS-A1K2WPS2; included with Chassis IPC-623BP-1KZC)
Or

800 W RPSU / 1200 W single power supply included with the Rackmaster 20 slot
PCIe expansion slots

17 PCIe x 16 3.0 slots (x16 mechanical, x16 electrical)

1 PCIe x16 3.0 slot (x16 mechanical, x4 electrical)
Notes

Choose a power cord with IEC C19 plug for the Advantech IPC-623BP-1KZC chassis model.
 All the dust protectors from the front as well as the sides of the chassis must be removed from the
Advantech IPC-623 chassis.
 The Advantech IPC-623 chassis fans must run at full speed.

The P1PCIE1 x4 slot is unusable due to the adjacent SHB slot.
 The P2PCIE1 x16 and P2PCIE2x16 slots are unusable due to mechanical conflict with the SHB CPU fan.

Card placement shown in the configuration table must be followed for better system ventilation.
 Any unused slots must be installed with solid brackets for proper system ventilation.

Ensure to have the following settings for GPU. Go to the system BIOS main page

Chipset System Agent (SA)
Configuration

Graphics Configuration
 and select:

Primary Display

AUTO

Internal Graphics

AUTO
(select
Enabled
for Console)

In the system BIOS, go to
Chipset

System Agent (SA) Configuration

Above 4GB MMIO BIOS Assignment

and
select
Enabled
.

On-board console support with D-Series controller. Requires 3.05 or later drivers.