Matrox Mura D-Series, Руководство по сборке системы

Страница: 44 / 88

44 Matrox Display Wall – System Builder’s Guide
Configurations
Performance considerations with D-Series controller
Processor Intel® Xeon® Silver 4112R CPU @ 2.60 GHz
Intel® Xeon® Silver 4210R CPU @ 2.40 GHz
Heatsink (for CPU) LGA 3647
System BIOS version 5.14, 2020-04-23
System memory 32 GB DDR4 ECC-RDIMM
Chassis ACP-4000 / ACP-4010
Power supply ACP-4000 chassis: Advantech FSP700-80PSA P/N:96PS-A700WPS2
ACP-4010 chassis: 750 W redundant power supply (Advantech P/N: RPS8-750ATX-XE)
PCIe expansion slots  2 PCIe x16 3.0 slots (x16 mechanical, x16 / x8 electrical)

3 PCIe x8 3.0 slots (x8 mechanical, x8 electrical)
 1 PCIe ×4 3.0 slot (×4 mechanical, ×4 electrical)
Notes

Requires two 120 mm x 120 mm x 25 mm 150 CFM chassis fans.

The dust protection sponge filter in front of the chassis must be removed for proper system ventilation
when smart fan is enabled.

If you use a wired mesh filter in front of the chassis, smart fan must be disabled. The chassis fans must run
at full speed.

Filter requires a 18 x18 size 304 stainless steel wire mesh.

In the system BIOS, go to
Advanced

IT8528 HW Monitor Tab

Fan Configuration Tab

select the header to
which the chassis fans are connected

and select the
Smart Fan Mode
:

Enabled
(when the dust protection filter is removed)

Disabled
(when a wired mesh filter is present)

In the system BIOS, select
Socket Configuration

IIO Configuration
, change the following from
[Auto]
to
[x8x8]
:

IOU1 (IIO PCIe Br2) [x8x8]

IOU2 (IIO PCIe Br3) [x8x8]

In the system BIOS, select
Advanced

PCI Subsystem Settings
, and make sure
Above 4G Decoding
is enabled.

On-board console support with D-Series controller. Requires 3.05 or later drivers.

Ensure to have the following settings for the GPU. In the system BIOS, go to
Platform Configuration

PCH
Devices
:

VGA Priority
- Select
Auto

Onboard VGA Controller
- Select
Enable
Slot
D-Series based controller Third-party based controller
Main Options Main Options
PCIEX1_Slot1 N/A N/A
PCIEX4_Slot2 N/A N/A
PCIEX8_Slot3 MURAIPXI-E4JF A MURAIPXI-E4JF A
PCIEX16_Slot4 D1480 B Third-party graphics hardware
PCIEX8_Slot5 MURAIPXI-E4JF A, B MURAIPXI-E4JF A
PCIEX16_Slot6 D1480 B Third-party graphics hardware A
PCIEX8_Slot7 MURAIPXI-E4JF A, B MURAIPXI-E4JF A
Slot Connectivity Configuration 1 Configuration 2
PCIEX1_Slot1 x1 N/A N/A
PCIEX4_Slot2 x4 N/A N/A
PCIEX8_Slot3 x8 / x0 A A
PCIEX16_Slot4 x16 / x8 B* B*
PCIEX8_Slot5 x8 / x0 A A
PCIEX16_Slot6 x16 / x8 A B*
PCIEX8_Slot7 x8 A A