Matrox Mura D-Series, Руководство по сборке системы

Страница: 41 / 88

Matrox Display Wall – System Builder’s Guide 41
Supermicro SYS-5049A-TR
Configurations
Performance considerations with D-Series controller
Note : * The D-Series bandwidth is reduced to 6 GB/s instead of 12 GB/s when shared slots are used. However, the performance depends on
the layout, the number of streams going to each D-Series, rendering done, and the intended usage. Shared slots are 2&3, 4&5, and 6&7.
D-Series based controllers Third-party based controllers
Validated Yes No foreseeable compatibility issues
Maximum number of cards
supported
7
Maximum supported
Mura IPX Series
6
Maximum supported
D-Series
4
Motherboard X11SPA-T
Chipset Intel C621
Processor Intel® Xeon Silver 4208 CPU @ 2.10 GHz
Heatsink (for CPU) LGA 3647
System BIOS version 3.3
System memory 32 GB DDR4 ECC-RDIMM
Chassis 4U
Power supply 2200 W redundant power supply
PCIe expansion slots 4 PCIe x16 3.0 slots (x16 electrical and mechanical)
3 PCIe x16 3.0 slots (x8 electrical, x16 mechanical)
Notes

The system fan speed must be set to
HeavyIO
mode in IPMI.
 Optional rack-mount kit mounting rails are available (Supermicro part#: MCP-290-00059-0B).
Slot
D-Series based controller Third-party based controller
Main Option Main Option
CPUSLOT1PCI-E3.0x16 D1480 B Third-party graphics hardware
CPUSLOT2PCI-E3.0x8 MURAIPXI-D4JF A MURAIPXI-D4JF A
CPUSLOT3PCI-E3.0x16 D1480 A, B Third-party graphics hardware A
CPUSLOT4PCI-E3.0x8 MURAIPXI-D4JF A MURAIPXI-D4JF A
CPUSLOT5PCI-E3.0x16 D1480 A, B Third-party graphics hardware A
CPUSLOT6PCI-E3.0x8 MURAIPXI-D4JF A MURAIPXI-D4JF A
CPUSLOT7PCI-E3.0x16 D1480 A, B Third-party graphics hardware A
Slot Connectivity Configuration 1 Configuration 2 Configuration 3 Configuration 4
CPUSLOT1PCI-E3.0x16 x16 B B B B
CPUSLOT2PCI-E3.0x8 x8 / x0 A A A A
CPUSLOT3PCI-E3.0x16 x16 / x8 A B* B* B*
CPUSLOT4PCI-E3.0x8 x8 / x0 A A A A
CPUSLOT5PCI-E3.0x16 x16 / x8 A A B* B*
CPUSLOT6PCI-E3.0x8 x8 /x0 A A A A
CPUSLOT7PCI-E3.0x16 x16 / x8 A A A B*