Matrox Mura D-Series, Руководство по сборке системы

Страница: 24 / 88

24 Matrox Display Wall – System Builder’s Guide
Configurations
Performance considerations with D-Series controller
Note : * The D-Series bandwidth is reduced to 6 GB/s instead of 12 GB/s when shared slots are used. However, the performance depends on the layout,
the number of streams going to each D-Series, rendering done, and the intended usage. Shared slots are 2&3, 4&5, and 6&7.
Power supply Advantech 750 W redundant power supply
PCIe expansion slots

7 PCIe 3.0 / 2.0 x16 slots
Notes  Requires two120 mm x 120 mm x 25 mm 150 CFM chassis fans running at full speed.

To change the chassis fan speed, go to the system BIOS main page (EZ mode)

Select
QFan Control

select the header to which the fans are connected

change from
Standard
to
Full Speed
and apply the
changes.
 Two dust protection sponge filters present on the front door and in front of the fans must be removed for
proper system ventilation.
 If you use a wired mesh filter, the ambient temperature must not exceed 40 degrees centigrade. Filter
requires a 18 x18 size 304 stainless steel wire mesh.
 Ensure to have the following default settings for Above 4G Decoding. In the system BIOS, go to
Advanced
Mode

Boot
, then set
Above 4G Decoding
to
ON
and set
First VGA 4G Decode
to
Above_4G
.
 Add-in board console support with D-Series controller. Requires 3.05 or later drivers.
Slot
D-Series based controller Third-party based controller
Main Option Main Option
PCIEX16_1 D1480 B Third-party graphics hardware
PCIEX16_2 MURAIPXI-D4JF A MURAIPXI-D4JF A
PCIEX16_3 D1480 A, B Third-party graphics hardware A
PCIEX16_4 MURAIPXI-D4JF A MURAIPXI-D4JF A
PCIEX16_5 D1480 A, B Third-party graphics hardware A
PCIEX16_6 MURAIPXI-D4JF A, C MURAIPXI-D4JF A
PCIEX16_7 D1480 A, B Third-party graphics hardware A
Slot Connectivity Configuration 1 Configuration 2 Configuration 3 Configuration 4
PCIEX16_1 x16 B B B B
PCIEX16_2 x8 / x4 A A A A
PCIEX16_3 x16 / x8 A A B* B*
PCIEX16_4 x8 / x0 A A A A
PCIEX16_5 x16 / x8 A B* B* B*
PCIEX16_6 x8 / x0 A A A A
PCIEX16_7 x16 / x8 A A A B*
Option Product
A MURAIPXI-E4SF, MURAIPXI-E4SHF, MURAIPXI-D2MF, MURAIPXI-D2MHF, MURAIPXI-E2MF, MURAIPXI-E2MHF,
MURAIPXI-D4JF, MURAIPXI-D4JHF, MURAIPXI-E4JF, or MURAIPXI-E4JHF
B D1450 or D1480
C Matrox M9148 LP PCIe x16, Matrox M9140 LP PCIe x16, Matrox M9138 LP PCIe x16, Matrox M9128 LP PCIe x16,
Matrox M9120 Plus LP PCIe x16, Matrox M9120 Plus LP PCIe x1, Matrox M9120 PCIex16, NVIDIA Quadro P600,
NVIDIA Quadro K620, AMD Radeon WX2100, or AMD Radeon Vega 8 (add-in card console options)