Matrox Mura D-Series, Руководство по сборке системы

Страница: 52 / 88

52 Matrox Display Wall – System Builder’s Guide
ASUS Pro WS X299 SAGE II
Configurations
D-Series based controllers Third-party based controllers
Validated Yes No foreseeable compatibility issues
Maximum number of cards
supported
7
Maximum supported
Mura IPX Series
6
Maximum supported
D-Series
4
Motherboard ASUS Pro WS X299 SAGE II
Chipset Intel X299
Processor Intel ®Core i9-10900X CPU @ 3.70 GHz (X-series, 48 lane CPU), or
Intel ®Core i7-9800X CPU @ 3.80 GHz (X-series 44 lane CPU), or
Intel ®Core i9-9920X CPU @3.50 GHz (X-series, 44 lane CPU)
Heatsink (for CPU) LGA 2066
System BIOS version 0702, 2020-06-10
System memory 32 GB DDR4
Chassis Chenbro RM41300-FS81 (includes fans)
Power supply 850 W (P/N:EVGA Supernova 850G3)
PCIe expansion slots

7 PCIe x16 3.0 / 2.0 slots
Notes  The chassis must be ordered from Chenbro. Power supply isn’t included with the chassis.

The chassis fans must run at full speed. To change the fan speed, go to the system BIOS main page (EZ
mode)
 select
QFan Control
 select the header to which the fans are connected  change from
Standard
to
Full Speed
and apply the changes.
 Two dust protection filters present in front of the chassis must be removed for proper system ventilation.

Ensure to have the following default settings for Above 4G Decoding. In the system BIOS, go to
Advanced
Mode

Boot
, then set
Above 4G Decoding
to
ON
and set
First VGA 4G Decode
to
Above_4G
.

Add-in board console support with D-Series controller. Requires 3.05 or later drivers.
Slot
D-Series based controller Third-party based controller
Main Option Main Option
PCIEX16_1 D1480 B Third-party graphics hardware
PCIEX16_2 MURAIPXI-D4JF A MURAIPXI-D4JF A
PCIEX16_3 D1480 A, B Third-party graphics hardware A
PCIEX16_4 MURAIPXI-D4JF A MURAIPXI-D4JF A
PCIEX16_5 D1480 A, B Third-party graphics hardware A
PCIEX16_6 MURAIPXI-D4JF A, C MURAIPXI-D4JF A
PCIEX16_7 D1480 A, B Third-party graphics hardware A