Matrox Mura D-Series, Руководство по сборке системы

Страница: 64 / 88

64 Matrox Display Wall – System Builder’s Guide
MSI TRX40 PRO 10G
Configurations
Performance considerations with D-Series controller
D-Series based controllers Third-party based controllers
Validated Yes No foreseeable compatibility issues
Maximum number of cards
supported
3
Maximum supported
Mura IPX Series
2
Maximum supported
D-Series
3
Motherboard MSI TRX40 PRO 10G
Chipset AMD TRX40
Processor AMD Ryzen™ Threadripper™ Pro 3960X @3.8 GHz
Heatsink (for CPU) sTRX4
System BIOS version 1.50, 3/20/2020
System memory 32 GB DDR4
Chassis Chenbro RM41300 FS81
Power supply 750 W (P/N: EVGA SuperNOVA 750 G3)
PCIe expansion slots

4 PCIe x16 4.0 slots
Notes  The chassis must be ordered from Chenbro. Power supply isn’t included with the chassis.

The chassis fans must run at full speed. To set or change the fan speed, in the system BIOS, go to
Settings

Hardware Monitor
 and select
All full Speed (f)
.

In the system BIOS, go to
Settings

Advanced

PCI Subsystem Settings

Above 4G
and select
Enabled
.
 Slot 2 (PCI_E2 PCIe 4.0 x8) cannot be used due to card detection issues.
Slot
D-Series based controller Third-party based controller
Main Options Main Options
PCI_E1: PCIe 4.0 x16 D1480 B Third-party graphics hardware -
PCI_E2:PCIe 4.0 x8 Cannot be used - Cannot be used -
PCI_E3: PCIe 4.0 x16 D1480 A, B Third-party graphics hardware A
PCI_E4: PCIe 4.0 x1 N/A N/A N/A -
PCI_E5: PCIe 4.0 x8 MURAIPXI-E4JHF A, B MURAIPXI-E4JHF A
Slot Connectivity Configuration 1 Configuration 2
PCI_E1: PCIe 4.0 x16 x16 B* B*
PCI_E2:PCIe 4.0 x8* x8 A N/A
PCI_E3: PCIe 4.0 x16 x16 N/A B
PCI_E4: PCIe 4.0 x1 x1 A N/A
PCI_E5: PCIe 4.0 x8 x8 A A