Matrox G200 MMS – User Guide
7
6
Connect your monitors
a
Attach your Matrox dual-monitor
adapters
*
to the connectors on the
bracket of your Matrox MMS card.
Make sure the connectors are firmly in
place.
If you have an MMS-Quad card with a
TV tuner, connect the dual-monitor
adapter with the composite video
(RCA) connector to the connector on
the bottom part of the bracket (
#1/#2
).
b
Analog monitors –
If you’re using
analog dual-monitor adapters
(included with your Matrox MMS
product), plug your monitor cables into
them. Make sure the other end of each
monitor cable is properly connected to
its monitor. See your monitor manuals
for more information.
Digital monitors
–
If you’re using digital
dual-monitor adapters (sold
separately), plug the ends of your
adapters directly to your digital
monitors. These long adapters replace
the cables that came with your digital
monitors.
Make sure all connectors are firmly in
place.
* Only one dual-monitor adapter is included with Matrox MMS-
Dual
cards.
WARNING:
To avoid damaging the LFH-60 connector on your
dual-monitor cable or on your graphics card, carefully insert the
connector on your dual-monitor cable as straight as possible into
the connector on your graphics card. Specifically, inserting the
connectors into each other at an angle is likely to bend and damage
the pins on the connector of the dual-monitor cable.
Analog
monitor
cable
Analog dual-monitor adapter
(included)
Matrox card
Digital dual-monitor adapter
(sold separately)
Digital monitor
