Matrox G200 MMS, Руководство пользователя

Страница: 43 / 78

Matrox G200 MMS – User Guide 43
2
Solution
Windows 98/Me/2000/XP – For advanced users – To use a program that doesn’t support
multi-display systems, you can disable all displays other than your primary display:
1
Windows 2000/XP – Restart your computer in safe mode ( see “Restarting in safe mode”,
page 20 ).
2
Windows 98/Me – Click
Start
"
Settings
"
Control Panel
"
System
(double-click) "
Device Manager.
Windows 2000/XP – Click
Start
"
Settings
*
"
Control Panel
"
Performance and
Maintenance
*
"
System
(double-click*)
"
Hardware
"
Device Manager
. (* Depending
on your version and configuration of Windows, this part of the step may not be
necessary.)
3
Click the plus sign to the left of the
Display adapters
.
4
For each display adapter, except for the one controlling your primary display:
Windows 98/Me – Double-click the name of a
display adapter to open a properties dialog box.
Enable the
Disable in this hardware profile
check
box, then click
OK
.
Windows 2000/XP – Right-click the name of a display adapter, then click
Disable
"
Yes
.
5
Windows 98/Me – Click
Close
"
Yes
.
6
Restart your computer for changes to take effect.
Problem Not all graphics cards in the computer are fully supported
(Software doesn’t work with a certain graphics card, or another
graphics card doesn’t work at all)
1
Cause
If you have different models of graphics cards in your computer, your Matrox display driver
may not support all the graphics cards in your computer.
Note: Your primary display can’t be disabled.
Note: To restore display adapters, repeat steps 2 – 6 , but do the following in step 4 :
! Windows 98/Me – Clear the
Disable in this hardware profile
check box.
! Windows 2000/XP – Click
Enable
.