Matrox G200 MMS – User Guide
11
2
Connect audio input
To connect the audio output of your video
camera or video player, you need an audio
cable with a stereo jack on one end and two
RCA connectors on the other end. This type
of cable is available at most electronics
stores.
a
Plug the stereo-jack end of the audio
cable into the
LINE IN
(
) connector
on your sound card.
b
Plug the other end into left (
L
) and right
(
R
)
AUDIO OUT
on the video device you
connected to in
. (On the audio
cable, white is for “left” and red is for
“right”. If your video device has only one
audio connector, use the left audio
connector on the cable.)
For more information on audio input types,
see “Matrox video input”, page 12
3
Connect TV antenna or cable
TV
a
Plug the smaller end of the cable
extension into the
ANT/CABLE
connector on your graphics card.
b
Connect your TV antenna or cable TV
to the other end of the cable extension.
Video camera or
video player
Note:
To make it easier to connect, you may need to
temporarily
remove a dual-monitor
adapter from your Matrox card.
Note:
If the cable from your antenna is flat
and ends with twin leads, you need a
300-to-75-ohm adapter to connect to the
ANT/CABLE
connector (see picture). You
can find this type of adapter at most
electronics stores.
ANT/CABLE
TV antenna
or cable TV
Cable extension
300-to-75-ohm
adapter
