Matrix simado gfx11 Скачать руководство пользователя страница 9

Страница: 9 / 88

Matrix SIMADO GFX11 System Manual

Tip:

It indicates a helpful hint giving you an alternative way to operate the system or carry out a procedure,

or use a feature more efficiently.

Terminology

Throughout this System Manual, both the models—

SIMADO GFX11 and SIMADO GFX11E

—have been referred

to as SIMADO GFX11, unless otherwise specified. The words

SIMADO GFX11

and

System

are used

synonymously.

Some of the terms used in this System Manual are defined below:

System Engineers (SE):

Persons who install, configure and maintain SIMADO GFX11/GFX11E.

System Administrators (SA):

Persons who operate the system and perform administrative functions.

Users:

Persons who uses SIMADO GFX11/GFX11E.

Caller/ Calling party:

The person who make calls.

Called party:

The person to whom the call is made.

Using this System Manual, we hope you will be able to install, operate and make optimum use of your SIMADO
GFX11/GFX11E. However, if you encounter any technical problems, please contact your dealer/reseller or the
Matrix Customer Care.

Содержание simado gfx11

























































































Результаты поиска

Содержание simado gfx11

Отзывы:

Matrix simado gfx11, Системное руководство, Страница: 9 / 88

Результаты поиска

Содержание simado gfx11

Отзывы: