Matrix simado gfx11, Системное руководство, Страница: 28 / 88

22 Matrix SIMADO GFX11 System Manual
• Open Loop Disconnect: This option is used when call disconnection is to be generated in the form of
Open Loop Disconnect pulse. In Open Loop Disconnect, the battery voltage on the FXS Port is removed
for the duration of the
Open Loop Disconnect Timer and then it is restored after the FXS Port goes On-
Hook.
• To configure disconnect signaling on the FXS Port, dial:
248-Disconnect Signal-#*
Where,
Disconnect Signal is
0 for None
1 for Polarity Reversal
2 for Open Loop Disconnect
Default: Polarity Reversal
• To configure Open Loop Disconnect Timer on FXS Port, dial:
249-Open Loop Disconnect Timer-#*
Where,
Open Loop Disconnect Timer is from 001 to 999 ms.
Default: 500 ms
No Dial Tone on FXS Port
You may enable or disable the dial tone on the FXS Port, when SIMADO GFX11 is not registered with the network.
• To enable or disable the dial tone on the FXS Port, dial:
103-No Tone when system not registered-#*
Where,
No Tone when system not registered is
0 for Disable (Tone to be played)
1 for Enable (No Tone to be played)
Default: Disable
Even when SIMADO GFX11 is not registered with the network,
• you will be able to make Emergency calls.
• you will be able to configure the system by entering the programming mode.
You may exit the SE Mode or continue with the system configuration.