Matrix simado gfx11, Системное руководство, Страница: 37 / 88

Matrix SIMADO GFX11 System Manual 31
Passwords
It is possible to configure SIMADO GFX11 and access the system in two modes: System Engineer (SE) Mode and
System Administrator (SA) Mode. Both these modes are protected by Passwords. To know more about the SE
Mode and the SA Mode, see
“Configuring SIMADO GFX11/GFX11E”.
System Engineer (SE) Password
System Engineer mode is protected by the password referred to as SE password. SE password prevents
unauthorized alterations in SIMADO GFX11 and misuse of its features and facilities. The default SE password is
1234 . You can change the default SE password to the desired value.
• Enter SE Mode.
• To change SE password, dial:
107-New SE Password-#*
Where,
The New SE Password can be of maximum four digits. Allowed digits are from 0 to 9.
Default: 1234
• Exit SE Mode or continue with the system configuration.
System Administrator (SA) Password
The System Administrator level is protected by the password called SA password. The default SA password is
1111 . You can change the default SA password to the desired value.
• Enter SE/SA Mode.
• To change SA Password, dial:
108-New SA Password-#*
Where,
New SA Password can be of maximum four digits. Accepted digits are from 0 to 9.
Default: 1111
Forgot SE Password?
If you forget the SE password, you can reset it to its default value by changing the position of jumper J2.
To set the SE password to its default value ( 1234 ), follow the steps given below:
• Switch Off SIMADO GFX11.
• Open the cover and locate jumper J2. The jumper is in BC position.
• Change the jumper position to AB.
• Switch On the system.
• Switch Off the system after 5 minutes.
• Restore jumper to its original BC position
• Replace the cover and switch On the system again.
• SE password is set to its default value.
Password Reset Jumper for both SIMADO GFX11 and GFX11E is same ( J2 ).