Matrix simado gfx11, Системное руководство, Страница: 23 / 88

Matrix SIMADO GFX11 System Manual 17
CHAPTER 4
Configuring SIMADO
GFX11/GFX11E
You can configure SIMADO GFX11/GFX11E by dialing command strings from the telephone connected to the FXS
Port of SIMADO GFX11/GFX11E. You can configure the system from two modes namely: System Engineer Mode
and System Administrator Mode.
Throughout this System Manual, both the models— SIMADO GFX11 and SIMADO GFX11E —have been
referred to as SIMADO GFX11, unless otherwise specified. The words SIMADO GFX11 and System are
used synonymously.
System Engineer (SE) Mode
In System Engineer (SE) mode, you have full access to the system and you can configure and use all the features
of the system.
The System Engineer mode is protected by a password referred to as SE password .
To configure SIMADO GFX11 from SE mode:
• Lift the receiver of the telephone connected to SIMADO GFX11.
• To enter SE mode, dial #*-19-SE Password . The default SE Password is 1234 .
• Dial the command string.
• To exit SE mode, dial 00-#*
• Replace the receiver of the telephone.
While dialing command strings, you must dial the digits and characters in a continuous sequence. For
example, to enter SE Mode you must dial the command string as
#*191234
System Administrator (SA) Mode
In System Administrator (SA) mode, you have limited access to the system.
You can configure and access only following features:
• SA Password Change
• Software Version-Revision Display
• Call Duration Display