Matrix simado gfx11, Системное руководство, Страница: 26 / 88

20 Matrix SIMADO GFX11 System Manual
First Digit Wait Timer is from 01 to 99 seconds.
Default: 15 seconds
Inter Digit Wait Timer
The Inter Digit Wait Timer is the time for which the system will wait while receiving the digits dialed by the user, to
consider it as end of dialing.
• To configure the Inter Digit Wait Timer, dial:
226-Inter Digit Wait Timer-#*
Where,
Inter Digit Wait Timer is from 01 to 99 seconds.
Default: 05 seconds
End of Dialing
End of Dialing is a single digit on receipt of which, the system interprets end of the dialed string and the received
digits are further processed to reach the dialed destination number. SIMADO GFX11 supports only # as end of
dialing digit.
• To configure # as End of Dialing digit, dial:
110-1-#*
• To remove # as End of Dialing digit, dial:
110-0-#*
Default: # is used as end of dialing digit
Rep by DTMF digits in CLI
The GSM network presents the calling party number with the prefix '+' to the called party. However, not all
equipments can present the calling party number containing '+'. SIMADO GFX11 enables you to remove the prefix
'+' and replace it with an appropriate number string, if required.
• To configure the replacement digit for the ‘+’ sign in the CLI, dial:
301-Number String-#*
Where,
Number string can be of maximum four digits.
Default: 00
• To clear the replacement digit configured for the ‘+’ sign in the CLI, dial:
301-#*
Remove Country Code from CLIP
You may remove Country Code from the CLI received on the Mobile Port before presenting it on the FXS Port, if
required.
• To enable or disable the flag to remove the Country Code from the CLI received on the Mobile Port, dial:
102-Flag-#*