manualshive.com logo in svg

Matrix simado gfx11, Системное руководство, Страница: 58 / 88

Поделиться
Скачать
Matrix simado gfx11 Скачать руководство пользователя страница 58

52

Matrix SIMADO GFX11 System Manual

Emergency Number Dialing

The Emergency Number Dialing feature enables users to call emergency services such as Ambulance, Fire 
Brigade, Police from the Mobile Port of SIMADO GFX11. 

To use this feature, make sure that the Mobile Port is enabled and configure the Emergency Number Table in the 
system.

The Emergency Number Table stores up to 5 numbers against Index 1 to 5. By default, certain emergency 
numbers are pre-configured in this table, which you cannot change. However, you may add numbers, according to 
your requirement to this table.

This is how Emergency Number Dialing works:

•

A user dials a number.

•

SIMADO GFX11 first checks the Emergency Number Table.

•

If the dialed number matches with any of the numbers in the table, SIMADO GFX11 dials out the number, 
even in the following situations.
•

When SIM is absent

•

When SIM is invalid

•

When wrong SIM PIN is entered

•

When SIM is blocked

•

When GSM module is not registered 

When the dialed number matches with an Emergency Number in the table, SIMADO GFX11 will not check 
the Allowed and Denied Number Lists or the Automatic Number Translation Table. It will dial out the 
number.

In 

System Firmware Version V4

 and earlier, the GSM module supports certain fixed Emergency Numbers. You 

can configure only the number supported by the module in the Emergency Number Table. If you configure a 
number that is not supported by the module in the table, the system will not recognize this number as an 
emergency number and will not dial out this number.

In 

System Firmware Version V5R1 and later, 

if your system has SIMCOM-2G engine (SIM340-B01 and later) or 

SIMCOM-3G engine (Version V1.18 and later) installed, you can configure any number in the Emergency Number 
Table. The system will store the same number on the GSM module and will dial out only the numbers configured in 
Emergency Number Table.

In 

System Firmware Version V5R5

, when 2G GSM engine Sierra Wireless SL6087 is installed, SIMADO GFX11 

will support the following Emergency Numbers with and without SIM present in the system.

Emergency Numbers 

with SIM 

present in the system:

•

112

•

911

•

000

•

08

•

110

•

999

•

118

•

119

Содержание simado gfx11

























































































Отзывы:

Нет отзывов