Matrix simado gfx11, Системное руководство, Страница: 27 / 88

Matrix SIMADO GFX11 System Manual 21
Where,
Flag is
0 for Disable
1 for Enable
Default: Disabled
SIMADO GFX11 will Remove Country Code from CLIP only after Rep by DTMF digits in CLI , if
configured.
Country Code
If you enable the flag to remove the Country Code from the CLI received on the Mobile Port, you must configure the
Country Code you want to remove from the CLI.
• To configure the Country Code, dial:
101-Country Code-#*
Where,
Country Code can be of maximum four digits. Allowed digits are from 0 to 9.
Default: Blank
• To clear the Country Code, dial:
101-#*
Answer Signaling on FXS Port
Answer Signaling is a signal generated on the FXS Port to indicate that the called party has answered the call (call
maturity). You can configure either None or Polarity Reversal as Answer Signal on the FXS Port. ‘None’ is
configured when no answer signaling is to be generated and ‘Polarity Reversal’ is configured when it is to be
generated in the form of Polarity Reversal.
• To configure answer signaling on FXS Port, dial:
221-Answer Signal-#*
Where,
Answer Signal is
0 for None
1 for Polarity Reversal
Default: Polarity Reversal
Disconnect Signaling on FXS Port
Disconnect Signaling is a signal generated on the FXS Port to indicate that the other party has disconnected the
call. When the called party disconnects the call, SIMADO GFX11 will play error tone to the user. You can configure
one of the following options as Disconnect Signal on the FXS Port:
• None: This option is used when no disconnect signaling is to be generated on the FXS Port.
• Polarity Reversal: This option is used when disconnect signaling is to be generated in the form of Polarity
Reversal.