Master Forge 240-0028, Руководство оператора

Страница: 3 / 44

Some of these following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation
of these symbols will allow you to operate the tool better and safer.
SAFETY SYMBOLS
Page 2
WARNING:
The operation of any power tool can result in
foreign objects being thrown into your eyes, which can result in severe
eye damage. Before beginning power tool operation, always wear
safety goggles or safety glasses with side shields and a full-face shield
when needed. We recommend a Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side shields. Always use
eye protection which is marked to comply with ANSI Z87.1.
Symbol Name Designation / Explanation
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watts Power
Alternating current Type of current
Direct current Type of characteristic of current
no No-load speed Rotational speed at no load
.../min Per minute Revolutions, strokes, surface speed orbits, etc., per minute
Class II construction Double insulated construction
Be careful of your hand Danger keep hands away from blade
Wear safety goggles
Laser radiation Do not stare into beam or view directly with optical instruments
WARNING:
To ensure safety and reliability, all repairs should be performed by a qualified service technician.
This symbol designates that this tool is listed with
CSA requirements by CSA Testing Laboratories.