manualshive.com logo in svg

Masimo Rad-87, Руководство оператора

Поделиться
Скачать
Masimo Rad-87 Скачать руководство пользователя страница 22

2-4

Rad-87 Pulse CO-Oximeter Operator’s Manual

s y s t e m   d e s c r i p t i o n

2-4

2

CONTROL / INDICATOR

DESCRIPTION

12

Enter Button

Used to enter the setup menus and to select/activate 
certain entries within the menu/setup system.

13

Brightness 
Button

Controls the level of the brightness for the LED display 
by providing 4 levels of brightness. Each press of the 
button increases the brightness one level. Once level 4 
is accessed, an additional press of the button returns 
the brightness to level 1.  Press the Enter Button to 
select brightness level.

14

Up Button
Down Button

Use these buttons to adjust the volume of the pulse 
beep tone.

 Within the menu/setup system, these buttons are used 
to select values within each menu option or the numeric 
value for the parameter/measurement alarm feature. 

Pressing and holding down these buttons allow for the 
rapid scrolling of alarm limits.

15

Pleth Variability 
Index 

PVI is displayed as a percentage.
The lower the height of the bar, the less variability there 
is in the PI over a respiratory cycle.
Press the Display key to toggle to the PVI numeric 
measurement.

16

Battery Charge 
Level Indicator

Provides a visual representation of the battery charge 
status. When unplugged, bars illuminate to indicate full 
battery charge. As the battery discharges power, bar 
illumination decreases from right to left.

A low battery status is indicated by a low audible beep 
and the first battery bar to the left flashing green. 

17

AC Power 
Indicator

The AC Power Indicator is illuminated when the Rad-87 
is connected to AC power and during battery charging.

18

Power Button

Used to turn the device on and off.  Press the button 
once to power on the device. Press the button for 2 
seconds to power off the device.

19

Pulse 
CO-Oximeter 
Patient Cable 
Connector

Connects to a Masimo Pulse CO-Oximeter sensor or 
Masimo Pulse CO-Oximeter Patient Cable with a sensor. 

20

Speaker

Provides audible indication of alarm conditions, pulse 
tone and feedback for key-presses.

Содержание Rad-87






































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды