MARUTI SUZUKI TOUR V Скачать руководство пользователя страница 16

Страница: 16 / 141

EMISSION WARRANTY POLICY

Maruti Suzuki offers the Emission Warranty on all Maruti Suzuki

vehicles (apart from the Regular Warranty and will run parallel to

the regular product warranty) only in four metropolitan cities

(New

Delhi, Kolkata, Mumbai and Chennai)

with effect from July 1st,

2001.

Terms:

The Emission Warranty will be applicable for

80,000 kms or 3

years

(Whichever comes earlier) from the date of invoice to the

first owner. The remaining warranty terms will be valid in case of

any change in ownership provided the production of all valid docu-

ments.

Conditions:

1. Under Emission Warranty, Warranty claims will be admitted for

a prima-facie examination, in case vehicle fails to meet the

Emission Standard as specified in sub rule (2) of rule no. 115 of

Central Motor Vehicles Rules (CMVR), 1989.

2. The warranty claims will only be accepted after examination

carried out by Maruti Suzuki or Maruti Suzuki authorised work-

shop which leads to firm conclusions that the

a) Original settings have not been tampered in any case.

b) Part (as given in Annexure - A) has a manufacturing defect.

c) Vehicle is unable to meet the Emission Standards (as given

in 1.), inspite of the vehicle having been maintained and

used in accordance with the instructions as specified in

Owner’s Manual and Service Booklet and the used fuel and

different oils (Engine oil, Transmission oil, Brake oil etc.) are

also as per specification.

3. The method of examination for deciding the warranty of the

parts will be at the sole discretion of Maruti Suzuki and Maruti

Suzuki authorised workshop and results of the examination will

be final and binding. If after examination, the warrantable con-

dition is not established, Maruti Suzuki and Maruti Suzuki

authorised workshop has the right to charge all, or part of the

cost of such examination.

4. Under Emission Warranty, the parts (as given in Annexure - A)

will be changed free of cost, but the consumables will be

charged as per actual.

5. If the part covered under Emission Warranty or the associated

parts, are not independently replaceable, on account of these

being integral parts of a complete assembly, Maruti Suzuki and

Maruti Suzuki authorised workshop will have the sole discre-

tion to replace either the entire assembly or by using some of

the parts of the system through suitable repairs or modifica-

tions.

6. Any consequential repairs or replacement of parts which may

be found necessary to establish compliance of Emission War-

ranty, will not be considered under warranty, unless the same

is under product warranty. The consumable will be charged as

per actual under such repair or replacement.

7. Maruti Suzuki will not be responsible for the cost of transporta-

tion of the vehicle to the nearest Maruti Suzuki authorised

workshop or any loss due to non-availability of the vehicle

during the period of lodging of a warranty claim and examina-

tion and/or repair by Maruti Suzuki authorised workshop.

8. Maruti Suzuki will not be responsible for any penalty that may

be charged by statutory authorities on account of failure to

comply with the EMISSION STANDARDS.

9. Emission Warranty will not be affected by the change of owner,

provided all the documents are available.

Содержание TOUR V














































































































































Результаты поиска

Содержание TOUR V

Отзывы:

Похожие инструкции для TOUR V

Бренды по названию

Популярные бренды

MARUTI SUZUKI TOUR V, Руководство пользователя

Результаты поиска

Содержание TOUR V

Отзывы:

Похожие инструкции для TOUR V

Бренды по названию

Популярные бренды