MARUTI SUZUKI TOUR V Скачать руководство пользователя страница 108

Страница: 108 / 141

8-17

INSPECTION AND MAINTENANCE

76MH1-74E

09-81A056A

2) Check that the depth of the tread

groove is more than 1.6 mm (0.06 in).

To help you check this, the tyres have

mouldedin tread wear indicators in the

grooves. When the indicators appear

on the tread surface, the remaining

depth of the tread is 1.6 mm (0.06 in) or

less and the tyre should be replaced.

3) Check for abnormal wear, cracks and

damage. Any tyres with cracks or other

damage should be replaced. If any

tyres show abnormal wear, have them

inspected by your Maruti Suzuki autho-

rised workshop.

4) Check for loose wheel nuts.

5) Check that there are no nails, stones,

or other objects sticking into the tyres.

WARNING

• Air pressures should be checked

when the tyres are cold or you may

get inaccurate readings.

• Check the inflation pressure from

time to time while inflating the tyre

gradually, until the specified pres-

sure is obtained.

• Never underinflate or overinflate

the tyres.

• Underinflation can cause unusual

handling characteristics or can

cause the rim to slip on the tyre

bead, resulting in an accident or

damage to the tyre or rim.

• Overinflation can cause the tyre to

burst, resulting in personal injury.

Overinflation can also cause

unusual handling characteristics

which may result in an accident.

Tread wear indicator

Indicator location
mark

EXAMPLE

WARNING

Hitting curbs and running over rocks

can damage tyres and affect wheel

alignment. Be sure to have tyres and

wheel alignment checked periodi-

cally by your Maruti Suzuki autho-

rised workshop.

WARNING

Your MARUTI SUZUKI is equipped

with tyres which are all the same type

and size. This is important to ensure

proper steering and handling of the

vehicle. Never mix tyres of different

size or type on the four wheels of

your vehicle. The size and type of

tyres used should be only those

approved by MARUTI SUZUKI as

standard or optional equipment for

your vehicle.

WARNING

Replacing the wheels and tyres

equipped on your vehicle with certain

combinations of aftermarket wheels

and tyres can significantly change

the steering and handling character-

istics of your vehicle. Therefore, use

only those wheel and tyre combina-

tions approved by MARUTI SUZUKI

as standard or optional equipment

for your vehicle.

Содержание TOUR V














































































































































Результаты поиска

Содержание TOUR V

Отзывы:

Похожие инструкции для TOUR V

Бренды по названию

Популярные бренды

MARUTI SUZUKI TOUR V, Руководство пользователя

Результаты поиска

Содержание TOUR V

Отзывы:

Похожие инструкции для TOUR V

Бренды по названию

Популярные бренды