MARUTI SUZUKI TOUR V Скачать руководство пользователя страница 70

Страница: 70 / 141

5-1

OPERATING YOUR VEHICLE

76MH1-74E

EXHAUST GAS WARNING

06-70G143A

EXAMPLE

WARNING

Avoid breathing exhaust gases.

Exhaust gases contain carbon mon-

oxide, a potentially lethal gas that is

colourless and odorless. Since car-

bon monoxide is difficult to detect by

itself, be sure to take the following

precautions to help prevent carbon

monoxide from entering your vehicle.

• Do not leave the engine running in

garages or other confined areas,

with passengers inside. This may

result in accumulation of carbon-

monoxide in cabin and may lead to

suffocation or breathing problems

and lead to death.

• Do not park with the engine run-

ning for a long period of time, even

in an open area. In case of long

periods, danger of choking and

death on being inside the vehicle is

a possibility when the engine is

running. If it is necessary to sit for

a short time in a parked vehicle

with the engine running, make sure

the air intake lever is set to “FRESH

AIR” and the fan is at high speed.

(Continued)

WARNING

(Continued)

• Avoid operating the vehicle with

the rear door open. If it is neces-

sary to operate the vehicle with the

rear door open, make sure all the

windows are closed, and the fan is

at high speed with the air intake

lever set to “FRESH AIR”.

• To allow proper operation of your

vehicle’s ventilation system, keep

the air inlet grille in front of the

windscreen clear of snow, leaves,

or other obstructions at all times.

• Keep the exhaust tailpipe area clear

of snow and other material to help

reduce the buildup of exhaust

gases under the vehicle. This is

particularly important when parked

in blizzard conditions.

• Have the exhaust system inspected

periodically for damage and leaks.

Any damage or leaks should be

repaired immediately.

Содержание TOUR V














































































































































Результаты поиска

Содержание TOUR V

Отзывы:

MARUTI SUZUKI TOUR V, Руководство пользователя, Страница: 70 / 141

Результаты поиска

Содержание TOUR V

Отзывы: