MARUTI SUZUKI TOUR V Скачать руководство пользователя страница 31

Страница: 31 / 141

1-10

BEFORE DRIVING

76MH1-74E

NOTE:

The driver’s seat belt reminder light / front

passenger’s seat belt reminder light is for

both the driver and front passenger.

Driver’s seat belt reminder

If the driver’s seat belt remains unbuckled

when the ignition switch is turned to the

“ON” position, the reminder works as fol-

lows:

1) The driver’s seat belt reminder light will

come on.

2) After the vehicle’s speed has reached

about 15 km/h, the driver’s seat belt

reminder light will blink and a buzzer

will sound for about 95 seconds.

3) The reminder light will remain on until

the driver’s seat belt is buckled.

If the driver has buckled his or her seat belt

and later unbuckles the seat belt, the

reminder system will be activated from

Step 1) or 2) according to the vehicle’s

speed. When the vehicle’s speed is less

than 15 km/h, the reminder will start from

Step 2).

The reminder will be automatically can-

celed when the driver’s seat belt is buckled

or the ignition switch is turned off.

Front passenger’s seat belt reminder

If there is a person sitting in the front pas-

senger seat and the front passenger seat

belt is unbuckled when the ignition switch

is turned to “ON” position, the front pas-

senger's seat belt reminder will activate.

69RH203

(2) The sensor of the front passenger’s

seat belt reminder

The seat belt reminder sensor (2) detects

whether a person is sitting in the front seat.

The sensor of the front passenger's seat

belt reminder is located in the seat cush-

ion. The front passenger’s seat belt

reminder works in the same manner as the

driver’s seat belt reminder.

WARNING

It is absolutely essential that the

driver and passengers wear their seat

belts at all times. Persons who are

not wearing seat belts have a much

greater risk of injury if an accident

occurs. Make a regular habit of buck-

ling your seat belt before putting the

key in the ignition switch.

(2)

EXAMPLE

NOTICE

• The sensor of the front passenger’s

seat belt reminder is located in the

seat cushion. If heavy or sharp

objects are put on the seat cush-

ion, or a removal, disassembly and

modification of the passenger’s

seat are performed, the sensor may

not work properly or can be dam-

aged. Do not put heavy or sharp

objects on the seat cushion. Do not

remove, disassemble and modify

the passenger’s seat.

• Depending on the variety of seat

cover, operation of the sensor may

be adversely affected. MARUTI

SUZUKI highly recommends that

you use MARUTI SUZUKI genuine

seat cover exclusively for this vehi-

cle.

• If you spill liquid such as liquid aro-

matics, soft drinks or juice on the

front passenger’s seat cushion, the

sensor of the front passenger’s

seat belt reminder located in the

seat cushion can be damaged.

Immediately wipe it dry with a soft

cloth when spilled.

(Continued)

Содержание TOUR V














































































































































Результаты поиска

Содержание TOUR V

Отзывы:

Похожие инструкции для TOUR V

Бренды по названию

Популярные бренды

MARUTI SUZUKI TOUR V, Руководство пользователя

Результаты поиска

Содержание TOUR V

Отзывы:

Похожие инструкции для TOUR V

Бренды по названию

Популярные бренды