MARUTI SUZUKI TOUR V, Руководство пользователя

Страница: 120 / 141

9-1
EMERGENCY SERVICE
76MH1-74E
JACKING INSTRUCTIONS
10-75F062A
10-77A036A
1) Place the vehicle on level, hard ground.
2) Apply the parking brake firmly and
change into "R" (Reverse). Chock the
front and rear of the wheel diagonally
opposite of the wheel being lifted.
3) Turn on the hazard warning flasher if
you vehicle is near traffic.
4) Position the jack vertically and raise the
jack by turning the jack handle clock-
wise until the jack head recess fits the
jacking point.
5) Continue to raise the jack slowly and
smoothly until the tyre clears the
ground. Do not raise the vehicle more
than necessary.
EXAMPLE
Front wheel
EXAMPLE
WARNING
• Use the jack only to change wheels
on level, hard ground.
• Never jack up the vehicle on an
inclined surface.
• Never raise the vehicle with the
jack in a location other than under
the specified jacking point (shown
in the illustration) near the wheel to
be changed.
• Make sure that the jack is raised at
least 2 inches (51 mm) before it
contacts the suspension arm boss.
Use of the jack when it is within 2
inches of being fully collapsed may
result in failure of the jack.
• Do not use wooden blocks or simi-
lar objects as jack underlay.
• Never get under the vehicle when it
is supported by the jack. Never
place you hands and feet under the
raised vehicle when it is supported
by jack.
• Never run the engine when the
vehicle is supported by the jack
and never allow passengers to
remain in the vehicle.