MARUTI SUZUKI TOUR V Скачать руководство пользователя страница 71

Страница: 71 / 141

5-2

OPERATING YOUR VEHICLE

76MH1-74E

DAILY INSPECTION
CHECKLIST

06-76A023A

Before driving:

1) Make sure that windshield, windows,

mirrors, lights, and reflectors are clean

and unobstructed.

2) Check the tyres.

3) Look for fluid and oil leaks.

NOTE:

It is normal for water to drip from the air

conditioning system after use.

4) Adjust the seat and head restraint.

(if adjustable)

5) Check the brake pedal and the parking

brake lever.

6) Adjust the mirrors.

7) Make sure that you and passengers

have properly fastened the seat belts.

8) Make sure that all warning lights come

on as the key is turned to the “ON” or

“START” position.

9) Check all gauges.

10)Make sure that the BRAKE FLUID

LEVEL WARNING light and the PARK-

ING BRAKE INDICATOR light (if

equipped) are off after the parking

brake is released.

Once a week, or each time you fill your fuel

tank, or before a long distance driving (like

highway driving) perform the following

under-hood/engine compartment checks:
1) Engine oil level.

2) Coolant level.

3) Brake fluid level.

4) Windscreen washer fluid level.

5) Battery solution level.

6) Hood latch operation.

Pull the hood release handle inside the

vehicle. Make sure that you can not

open the hood all the way without re-

leasing the secondary latch. Be sure to

close the hood securely after checking

for proper latch operation. See “All

Latches, Hinges & Locks” of "BODY" in

the “PERIODIC MAINTENANCE

SCHEDULE” in the “INSPECTION AND

MAINTENANCE” section for lubrication

schedule.

STARTING THE ENGINE

Before starting the engine:

1) Make sure the parking brake is applied

fully.

2) Manual Transmission – Shift into “N”

(Neutral) and depress the clutch pedal

all the way to the floor.

Hold it while starting the engine.

3) Start the engine according to the fol-

lowing procedures:

EXAMPLE

WARNING

Make sure the hood is fully closed

and latched before driving. If it is not,

it can fly up unexpectedly during

driving, obstructing your view and

resulting in an accident.

WARNING

Make sure that the parking brake is

applied fully and the transmission is

in Neutral before attempting to start

the engine.

CAUTION

• Stop turning the starter immedi-

ately after the engine has started or

the starter system can be dam-

aged.

• Do not crank the engine for more

than 15 seconds at a time. If the

engine doesn’t start on the first try,

wait about 15 seconds before try-

ing again.

Содержание TOUR V














































































































































Результаты поиска

Содержание TOUR V

Отзывы:

Похожие инструкции для TOUR V

Бренды по названию

Популярные бренды

MARUTI SUZUKI TOUR V, Руководство пользователя

Результаты поиска

Содержание TOUR V

Отзывы:

Похожие инструкции для TOUR V

Бренды по названию

Популярные бренды