Martini Instruments Mi 160, Инструкция по эксплуатации

Страница: 8 / 36

Instruction Manual Mi 160 Bench Meter
8 88 88
Notes Notes
Notes Notes
Notes:
•When the reading is out of range, the closest full-scale value is displayed blinking.
•If using a pH electrode while in mV mode, the instrument will measure the mV generated by the
pH electrode.
•If the instrument displays a Rel mV reading and it is desired to take mV measurements,
simply clear the Rel mV calibration (see Rel mV calibration section at page 17).
ISE ISE
ISE ISE ISE MEASUREMENTS
MEASUREMENTS
MEASUREMENTS MEASUREMENTS MEASUREMENTS
• Press the RANGE key to enter ISE measurement mode.
• Submerge the tip of the ISE electrode (4 cm/1½") into the sample to be tested and allow a
few seconds for the reading to stabilize.
• The instrument displays the ppm reading on the primary LCD and the temperature on the
secondary LCD.
or