Instruction Manual Mi 160 Bench Meter
26
26
26
26
26
SETUP
Setup mode allows viewing and modifying the following parameters:
• Calibration Alarm Time-Out (pH range only)
• Buffer Display (pH range only)
• Ion Charge (ISE range only)
• Current Time (hh:mm)
• Current Date (MM.DD.YYYY)
• Beep Status
• Baud Rate (serial communication)
• Instrument ID
• Temperature Unit
To enter SETUP mode, press and hold the SETUP key for about 3 seconds while in normal
measurement mode.
Select the desired setup parameter using the UP and DOWN arrow keys.
Press the CAL key if you want to change the item value. The selected item (e.g. hour) will start
blinking.
Press the arrow keys to change the blinking value.
If there is another item to be set (e.g. minutes), press the RANGE key, and that item will start
blinking.
