Martin Imager Series, Руководство оператора

Страница: 62 / 84

62 Troubleshooting
Troubleshooting
Error messages
Problem Probable cause(s) Remedy
No response from fixture
when power is applied. No power to fixture. Check power and data
cables.
Primary fuse blown in
Base. Replace fuse.
Fixture resets but does not
respond correctly to
controller (DMX mode
operation). Controller not connected. Connect controller.
Incorrect addressing of the
fixtures. Check address setting on
fixture and controller.
Bad data link connection. Inspect cables and correct
poor connections and/or
broken cables.
Data link not terminated. Insert termination plug in
output of last fixture.
Defective fixture or 2
devices transmitting on
link. Bypass fixtures one at a
time until normal operation
is regained: unplug both
connectors and connect
them directly together.
Fixture does not reset
correctly. Electronic or mechanical
failure. Contact service technician.
No light, lamp cuts out
intermittently, or burns out
too quickly. Lamp missing or blown. Disconnect fixture and
replace lamp.
Fixture or lamp is too hot. Allow fixture to cool. If
problem persists, contact
service technician.
Incorrect power supply
setting. Check setting.
Message in display Error Remedy
E E E
EPROM error Contact your Martin dealer for
service.
r A E
Memory error Contact your Martin dealer for
service.