1. Plug the power supply plug of the supply
transformer into the power supply socket.
The red supply LED (D1, page 6) will then
light up.
2. Actuate the on-off switch (T1, page 7)
on the control panel. At that moment,
the control panel establishes a connection
to the receiver. This process is indicated
by display LED 1 (D1, page 7) lighting up
yellow. When a connection has been esta-
blished, the display LED 1 changes colour
to green. The display LED 2 (D2, page 7)
then also lights up green. Furthermore, the
presence of the functioning connection is
denoted by the green operation LED (D2,
page 6) at the receiver.
3. Joysticks K1 and K2, the multidirectional
switch M1, the speed regulator S1 and
the two “function” and “off” buttons are
used for actuating the individual functions
of the gantry crane.
●
Push K1 upwards:
the load hook on the cable is lowered.
●
Push K1 downwards:
the load hook on the cable is raised.
●
Push K1 to the right:
crane cab moves to right.
●
Push K1 to the left:
crane cab moves to left.
●
Push K2 to the left:
the crane cab rotates anticlockwise.
●
Push K2 to the right:
the crane cab rotates clockwise.
●
Push M1 upwards:
the crane bridge moves forwards.
●
Push M1 downwards:
the crane bridge moves backwards.
●
The speed of the crane platform can
be changed via linear regulator S1.
●
It is not possible to actuate both func-
tions on joystick K1 at the same time.
●
The further the joysticks K1 and K2
are located from their centre positions,
the higher the speed at which the
respective function will be performed.
If the load hook is in its lower end posi-
tion, the rope is wound up in the oppo-
site direction when the “Lower load
hook” function is triggered again. This
automatically leads to the direction in
the vertical operator level being reversed
for joystick K1.
●
Press “function” button:
The illumination in the crane cab, the
flood lamp and (if connected) the electro-
magnet will all be switched on together.
●
Press “off” button:
the power consuming devices switched
on via “function” are again switched off.
If the function is at first switched off,
pressing the “off” button will switch it
on until the button is released again.
●
If no actuations are made to the trans-
mitter for a certain period of time, the
device will automatically switch off. By
pressing the on-off switch (T1, page 7),
you can reactivate the control panel at
any time.
Note: If the receiver is installed in a
concealed location, then the operating
indicator is not visible. Thus it is also
not possible to determine whether there
is a connection between the control
panel and the receiver (operating LED
D2 on the receiver lights constantly
green) or whether the connection has
been interrupted by the automatic
switch-off via the control panel (opera-
ting LED D2 on receiver flashes on and
off). In such a case, it is advisable to
connect an indicator lamp to contact
L1 of the receiver and to position this
on the system in such a way that it is
clearly visible.
●
Ensure that the distance between
control panel and receiver is not too
large (< 6 metres).
22
Commissioning
K1
K1
K1
K1
K1
K1
K1
K1
K2
K2
K2
K2
M1
M1
M1
M1
Содержание Portalkran 76500
Страница 1: ...Portalkran 76500...
