Installation manual - Eletta
®
- 25
3.7 Fastening of the operating rod (hand-operated covering system)
While installing the hand-operated covering system, after having mounted the handling system, it is necessary to assemble
and mount the operating rod.
For fastening the operating rod use the following items:
•
Insert the operating rod (1) into the extension piece (2) and drill 2 holes for
fastening it at the desidered height.
•
Fasten the operating rod (1) on the extension piece (2) with the supplied screws
(3) and self-locking nuts (4).
Note:
During its working life the structure is subject to vibrations and stress;
therefore, it is recommended to apply a threadlocker Loctite® liquid.
Place and fasten the operating rod on the pivot (5) of the manual transmission group,
with the supplied screws (3) and self-locking nuts (4) provided.
Fasten the holder for the rod:
•
Find a suitable location for the rod in order that it
does not become an obstacle;
•
Drill the tipper body to fit the holder’s holes;
•
Fasten the holder (7) with proper supplied rivets
(9).
•
Fasten the safety chain (11) of the forelock (8) with
proper supplied rivet (10).
