14 - Installation manual - Eletta
®
3.3.3 Installation of the side transmission groups for hand-operated control
The first elements to be installed on the front cab guard is the side transmission groups right or left, to be placed on the front
of the tipper, carefully examining the position on the right or left side of the cab guard (the drive units
are not
interchangeable).
TRANSMISSIONS FOR
CONTROL
DRIVER'S SIDE
Right side transmission
unit
Left side transmission unit
Right side transmission
unit
TRANSMISSIONS FOR
CONTROL
PASSENGER'S SIDE
Left side transmission
unit
•
Position the unit as in figure, by joining the support plate to the side of the cab guard of the vehicle and adjacent to the
front part.
•
The unit is fastened laterally with 2 countersunk screws (
A
) and nuts. However, if there are impediments on the side to
the correct fastening, it can be made also with the seats positioned on the upper rear part (holes for hexagonal-head
screws
B
) or upper front (hole
C
).
•
Proceed fastening the element to the cab guard using the screws, washers and self-locking nuts supplied, or
alternatively (if the thickness allows it) threaded M8 and tighten the screws, making sure to insert suitable thread locker
Note:
In this case we recommend to use oil tolerant Loctite 243 medium strength, or alternatively Loctite 262 medium
strength.
