8516 Hybrid NVR with RAID Installation Guide
30
Unit Setup
Attaching the Drip Trays to the Docking Station
Because the cooling fans are at the bottom of the recorder when wall-mounted, two drip trays are
required. The drip trays and four small countersunk screws required to attach the trays to the
docking station are included in the wall-mounting kit. It is recommended that you attach the drip
trays to the docking station before you mount it on the wall.
To wall-mount the docking station
1
Locate the left and right wall stud to which the recorder is to be mounted.
If the wall studs are behind drywall, use a stud finder to locate the wall studs, and then mark the
wall stud location.
2
Mark the upper mounting screw locations, using the brackets attached to the docking station as
a template. The wall mount holes are located 7.9 inches (20 centimeters) apart.
Wall-mounting: Attaching the drip trays
Drip trays
Drip trays attached
Screws
Wall-mounting: Upper mounting screw locations
Use the brackets to mark
the upper mounting
screw locations.
