8516 Hybrid NVR with RAID Installation Guide
37
Unit Setup
5
Loosen the four screws at the bottom of the hard drive bracket (two each side) and remove it
from the recorder.
Note:
Set the screws aside - you will use them to re-attach the bracket.
If you are replacing the hard drive in position 1 or 2, you need the right bracket, if you are
replacing the hard drive in position 3 or 4 you need the left bracket.
6 Remove the four screws attaching the old hard drive to the bracket and remove the old
hard drive.
7
Insert the new hard drive into the bracket using the four screws.
For the hard drives at the bottom of each bracket (positions 1 and 3) the side with the
exposed electronics must be facing up (the label facing down). For the hard drives at the
top of the bracket (positions 2 and 4) the side with the exposed electronics must be facing
down (the label facing up).
The data cable and power cable connections of the hard drives must face the middle of
the recorder when the hard drive bracket is in place.
Screws at
bottom of
bracket
Right
hard drive
bracket
