8516 Hybrid NVR with RAID Installation Guide
38
Unit Setup
Install and tighten the two screws on one side of a hard drive before installing and tightening
the two screws on the other side.
Note:
When tightening the screws, use 5.3 in-lbs (inch pounds) of torque.
8
For each position where you are replacing a hard drive, locate the data and power cables and
connect both cables to the hard drive before you install the bracket back in the unit. The data
cables are marked with numbers to indicate which position they go in: attach the data cable
marked 1 to the hard drive in position 1.
Screws securing
hard drive in bracket
Data cable
Power cable
