8516 Hybrid NVR with RAID Installation Guide
33
Unit Setup
Attaching the Drip Trays to the Recorder
Because the cooling fans are at the bottom of the recorder when wall-mounted, two drip trays are
required. The drip trays and four small pan head screws required to attach the trays to the recorder
are included in the wall-mounting kit. It is recommended that you attach the drip trays to the
recorder before you mount it on the wall.
To wall-mount the recorder
1
Locate the left and right wall stud to which the recorder is to be mounted.
If the wall studs are behind drywall, use a stud finder to locate the wall studs, and then mark the
wall stud location.
2
Mark the upper mounting screw locations, using the brackets attached to the recorder as a
template. The wall mount holes are located 7.9 inches (20 centimeters) apart.
Drip trays
Screws are circled (only 3 of 4 are visible)
Bottom bracket is attached
Left side of recorder:
bottom when
wall-mounted
Screw locations for drip trays
Wall-mounting: Upper mounting screw locations
Use the brackets to mark
the upper mounting
screw locations.
