8516 Hybrid NVR with RAID Installation Guide
17
Feature Overview
Note:
Information about operation and recording errors (indicated by the Operation or Recording LED) can
be retrieved using the Command Client or the Administrator Console (depending on which software platform
you are using, Command or Visual Intelligence).
For more information, see the
Command Enterprise User Guide
or the
Administrator Console User Manual
,
available from the March Networks Partner Portal.
Keyed Power Switch and Front USB Ports
There is a keyed power switch and two USB ports on the front of the unit.
Keyed Power Switch
If the unit has a docking station (RR model), when the unit is powered on, the locking mechanism
prevents the unit from being undocked. Turning the key to the left initiates shut down. Once the LEDs
are off, if the unit has a docking station, the unit can be safely removed from the docking station.
Two Front USB Ports
There are two USB ports on the front of the unit for connection of external peripherals.
Each port provides up to 0.5 A to power peripherals with a USB cable.
The ports support USB version 2.0.
Note:
Two more USB ports are available at the rear of the unit. For details, see “Ethernet Ports,
USB Ports, Video and HD Monitor Output” on page 21.
Export
LED
The status of an
export to an
external media
device.
Green
Solid:
Media transfer is complete.
Flashing:
Media transfer is in progress.
Blue
Solid:
External media device detected.
Flashing:
•
A request to export media clips to an external media device has been
initiated but the recorder is still logging the media. Exporting will not start
until the recorder finishes logging the media.
•
Media clips are ready to be exported to the external media device but no
external device is detected.
•
The external media device is full. Empty the device or insert a new one.
Red
Failure of media transfer.
Off
No external media device is connected or the external device is not usable.
Keyed Power Switch
2 USB Ports
