8516 Hybrid NVR with RAID Installation Guide
39
Unit Setup
9
Ensure that the power cables are connected to the main PCBA and the data cables are
connected to the RAID card.
The power cables are connected to the PCBA with the power cable for the hard drives in
position one and two on the far right, and the power cable for the hard drives in position three
and four on the far left, as shown in the photos below.
10 The data cables are connected to the right side of the RAID card, which is attached on top of
the main PCBA.
Power
cables 1 & 2
Power
cables 3 & 4
(back of unit)
(front of unit)
The power cables are connected
to the main PCBA in front of the
(left)
(right)
RAID card bracket
RAID card.
Data cable 1
4
3
2
1
(right side of unit)
(left side of unit)
Data cable 2
Data cable 3
Data cable 4
(front of unit)
(back of unit)
Raid card
