OPERATION
Printed in U.S.A.
79
50950436
/
H0521
Stay clear from underneath the ROPS/
FOPS as it is tilted down. Injury to
limbs can result.
3 .
Secure the ROPS/FOPS to the chassis
with anchor bolts, and washers . Torque
anchor bolts to 102 Nm (75 lb .-ft .) .
Always secure the ROPS/FOPS to the
chassis with anchor bolts and washers
(A, Fig. 31) before driving or using the
machine.
Self-Leveling (Option)
Self-leveling automatically keeps the tilt
angle of the attachment constant, relative to
the ground plane, (Fig . 33) when the lift arm
is raised (A) . This feature is especially useful
when using pallet forks .
IMPORTANT:
Self-leveling operates
only when the lift arm is raised: when the
lift arm is lowered (B), self-leveling is not
activated.
Fig. 33 -
A
A
A
B
B
B
Self-Leveling Operates When
Lift Arm is Raised
Self-Leveling Does Not
Operate When Lift Arm is
Lowered
Self-Leveling Operation
Float Control
Never use the float mode with the
attachment raised, because this will
cause the lift arm to lower very rapidly.
The float mode can be used where
the engine has stopped, is unable to
be started, and lowering the lift arm is
necessary to allow the operator to exit
the loader.
For Hand/Foot loaders, use your toes to push
the left foot pedal all the way down to detent
the float control. For T-Bar loaders push the
right control handle fully forward to detent the
float control. This mode allows the lowered
lift arm to follow the ground contour while
traveling over changing ground conditions .
For Hand/Foot loaders, use your heel to push
the left foot pedal up to horizontal to deacti-
vate . For T-bar loaders, pull the right control
handle rearward to deactivate. The float mode
is automatically deactivated when the machine
is shut off.
For Joystick loaders, press the float button on
the right control handle. Press float button for
5 seconds to activate continuous float. Press
button again to deactivate continuous float.
Connecting/Disconnecting
Attachments
To prevent unexpected release of the
attachment from the hitch, be sure to
secure the latch pins by rotating the
levers all the way to the hitch. Locking
pins must be fully engaged through the
holes in the attachment frame before
using the attachment. The attachment
could fall off if it is not locked on the
hitch and cause serious injury or death.
Содержание MUSTANG 1050RT
