Manitou MUSTANG 1050RT Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 156

background image

Introduction

50950436

/

H0521

14

Printed in U.S.A.

Legal Notices

Software IP

Any extraction, decompilation, modification, duplication, or distribution of onboard soft

-

ware is strictly prohibited . Manitou shall have no liability for and hereby disclaims all direct
and indirect liability for the consequences resulting from the use of any prohibited onboard
software . Contact MANITOU for any request to correct or adapt onboard software for the
purposes of interoperability .

Data Privacy

Manitou connected machines are equipped with boxes that collect technical data concern-
ing the machines (such as geolocation, operating, and component data) . This data, which is
organized, processed, and enriched by Manitou’s own algorithms and knowledge, constitutes
a protected database in accordance with Article L .341-1 of the French Intellectual Property
Code .

It is strictly forbidden to access all or part of this database or to use this data (whether or not
intentional) without Manitou’s express authorization . In the event that Manitou authorizes an
individual to access all or part of this database, Manitou, as producer of this database, only
grants the user a personal, non-exclusive, and non-transferrable right to use the database, and
only via access to a computer platform hosted on a server owned or controlled by Manitou .

In any case, the following activities are strictly prohibited:

- any extraction, reproduction, representation, reuse by making available to the public, diffu

-

sion, or transfer, whether permanent or temporary, on any support, and by any means and in
any form whatsoever, of all or a qualitatively or quantitatively substantial part of the contents
of the database,

- any extraction, reproduction, representation, reuse by making available to the public,

diffusion, transfer, or repeated and systematic extraction of qualitatively or quantitatively

insubstantial parts of the contents of the database when these operations clearly exceed the
conditions of normal use of the database by the user of the machine for his or her own needs,

- any use of a means of circumventing technical measures for the protection of databases or
the source code of the software embedded in the boxes, in accordance with Article L .331-5 of
the Intellectual Property Code .

In the event that the above measures are absolutely essential to enable the use of the software,
in accordance with its intended purpose, or to obtain the information necessary for interoper-

ability with other independently created software, the user must first contact Manitou, which

may, at its sole discretion, take necessary measures or provide access to only the information
strictly necessary for interoperability .

Any violation of these prohibitions is likely to constitute an infringement for which Manitou
may take legal action .

«
...
15
16
17
18
19
...
»

Содержание MUSTANG 1050RT





























































































































































Отзывы:

Нет отзывов

Похожие инструкции для MUSTANG 1050RT

MT 625 H 75K COMFORT ST5 S1

Бренд: Manitou Страницы: 136

Бренд: Case Страницы: 22

Бренд: Bush Hog Страницы: 42

Бренд: Bush Hog Страницы: 102

Бренд: Bush Hog Страницы: 106

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды