Manitou MUSTANG 1050RT, Руководство оператора

Страница: 66 / 156

OPERATION
Printed in U.S.A. 63
50950436
/
H0521
Fig. 18 -
A
B
C
D
E
Seat Belt
If the seat belt spool does not retract
slack in the seat belt, have it ser-
viced immediately. Do not operate the
machine until the seat belt is repaired.
Unfasten the seat belt by pressing button (D) .
Parking Brake
The parking brake is automatically applied
whenever:
1 . The engine is stopped .
2 . The restraint bar is in the raised position
(E, Fig . 18) .
3 . The operator leaves the seat .
4 . The cab swing-out door (if equipped) is
opened .
NOTE: The above conditions also
disable the hydraulic controls, with the
exception of standard auxiliary hydraulics
continuous flow.
The parking brake can alternately be applied
by pressing parking brake button (F, Fig . 19)
on the keypad until the indicator lights in the
button and the parking brake icon on the indi-
cator panel are lit .
Before starting the engine, sit in the operator’s
seat and lower the restraint bar . Close the
swing-out door (if equipped) .
IMPORTANT: The engine cannot be
started if the restraint bar is in the raised
position, the cab swing-out door is open
(if equipped), or the operator is not in the
seat.
Disengage Parking Brake
1 . Sit in the operator’s seat and fasten the
seat belt .
2 . Close the cab swing-out door (if
equipped) .
3 . Lower the restraint bar .
4 . Start the engine .
5 . Press and hold parking brake button (C,
Fig . 33) on the left keypad for several
seconds until the indicator lights in the
button and the parking brake icon on the
indicator panel go out .
Fig. 19 -
F
Parking Brake Button
Starting the Engine
NOTE: The machine cannot be push-
or tow-started. Attempting to push/tow
start the machine may damage the drive
system.
1 . Complete the “Operational Checks/Pre-
start Inspection” on page 61 .
2 . Sit in the operator’s seat and adjust the
seat if required .