Manitou MLT625-75 H S1-E3, Руководство оператора

Страница: 13 / 160

VI VI
ROUGH TERRAIN FORKLIFT TRUCK GENERAL SAFETY STANDARDS (cont.) ROUGH TERRAIN FORKLIFT TRUCK GENERAL SAFETY STANDARDS (cont.)
D.) SUSPENDED LOADS D.) SUSPENDED LOADS
A jib or truss boom should ONL A jib or truss boom should ONL Y be used to lift and place loads when the machine is stationary and the frame Y be used to lift and place loads when the machine is stationary and the frame
is level. is level. Transporting suspen Transporting suspen ded loads must AL ded loads must AL WA WA YS be done slowly and cautiously, with the boom and load YS be done slowly and cautiously, with the boom and load
as low as possible. Use as low as possible. Use taglines to restrict loads from swinging, to avoid overturn. taglines to restrict loads from swinging, to avoid overturn.
The handling of suspended loads by means of a truss boom or other similar device can introduce dynamic The handling of suspended loads by means of a truss boom or other similar device can introduce dynamic
forces affecting the stability of the machine that are not considered in the stability criteria of industry test forces affecting the stability of the machine that are not considered in the stability criteria of industry test
standards. Grades and sudden starts, stops and turns can cause the load to swing standards. Grades and sudden starts, stops and turns can cause the load to swing and create a hazard. and create a hazard.
Guidelines for “Free Rigging / Suspended Loads” Guidelines for “Free Rigging / Suspended Loads”
1. 1. DO DO NOT NOT exceed exceed the the rated rated capacity capacity of of the the telescopic telescopic handler handler as as equipped equipped for for handling handling suspended suspended
loads. The weight of the rigging must be loads. The weight of the rigging must be included as part of the load. included as part of the load.
2. 2. Dur Dur ing ing tra tra nsp nsp ort ort , DO , DO NOT NOT rai rai se t se t he l he l oad oad mor mor e th e th an 1 an 1 2 in 2 in che che s (3 s (3 05 m 05 m m) a m) a bov bov e th e th e gr e gr oun oun d, o d, o r ra r ra ise ise
the boom more than 45 degrees. the boom more than 45 degrees.
3. 3. On On ly ly li li ft ft th th e e lo lo ad ad ve ve rt rt ic ic al al ly ly – – NE NE VER VER dr dr ag ag it it ho ho ri ri zo zo nt nt al al ly ly . .
4. 4. Use Use mul mul tip tip le pi le pi cku cku p po p po int int s on t s on t he lo he lo ad wh ad wh en p en p oss oss ibl ibl e. U e. U se t se t agl agl ine ine s to r s to r est est rai rai n th n th e lo e lo ad f ad f rom rom swi swi ngi ngi ng ng
and rotating. and rotating.
5. 5. St St art art , tr , tr ave ave l, tu l, tu rn a rn a nd s nd s top top SLO SLO WL WL Y to Y to pre pre ven ven t th t th e lo e lo ad f ad f rom rom swi swi ngi ngi ng. ng. DO NO DO NO T ex T ex cee cee d wal d wal kin kin g g
speed. speed.
6. 6. Ins Ins pec pec t ri t ri ggi ggi ng b ng b efo efo re u re u se. se. Rig Rig gin gin g mu g mu st b st b e in e in goo goo d co d co ndi ndi tio tio n an n an d in d in the the U.S. U.S. com com ply ply wit wit h OS h OS HA HA
regulation §1910.184, “Slings,” or §1926.251, “Rigging regulation §1910.184, “Slings,” or §1926.251, “Rigging equipment for material handling.” equipment for material handling.”
7. 7. Rig Rig gin gin g eq g eq uip uip men men t att t att ach ach ed t ed t o th o th e fo e fo rks rks mus mus t be s t be s ecu ecu red red suc suc h th h th at i at i t can t can not not mov mov e eit e eit her her sid sid ewa ewa ys or ys or
fore and aft. The load center must not exceed 24 fore and aft. The load center must not exceed 24 inches (610 mm). inches (610 mm).
8. 8. DO NO DO NO T li T li ft t ft t he l he l oad oad wit wit h an h an yon yon e on t e on t he l he l oad oad , ri , ri ggi ggi ng o ng o r li r li ft e ft e qui qui pme pme nt, nt, and and NEVE NEVE R lif R lif t th t th e lo e lo ad o ad o ver ver
personnel. personnel.
9. 9. Beware Beware of of the the wind, wind, which which can can cause cause suspended suspended loads loads to to swing, swing, even even with with taglines. taglines.
10. 10. DO N DO N OT OT att att emp emp t t t t o u o u se f se f ram ram e-l e-l eve eve lin lin g t g t o co o co mpe mpe nsa nsa te f te f or or loa loa d sw d sw ing ing . .
U.S. OSHA regulations effective November 8, 2010 (29 CFR Part 1926, Subpart CC - U.S. OSHA regulations effective November 8, 2010 (29 CFR Part 1926, Subpart CC - Cranes and Derricks in Cranes and Derricks in
Construction) include requirements for employers that use powered industrial trucks ("forklifts") configured Construction) include requirements for employers that use powered industrial trucks ("forklifts") configured
to hoist (by means to hoist (by means of a winch of a winch or hook) and or hook) and move suspended loads horizontally move suspended loads horizontally . In par . In par ticular ticular , this regulation , this regulation
applies to any rough-terrain forklift (e.g., "telescopic handler") equipped with a jib or truss boom with a applies to any rough-terrain forklift (e.g., "telescopic handler") equipped with a jib or truss boom with a
hook (with or without a winch), or a hook assembly attached to the forks. [Note: This regulation is in hook (with or without a winch), or a hook assembly attached to the forks. [Note: This regulation is in
addition to the OSHA addition to the OSHA regulation that requires specific forklift regulation that requires specific forklift operator training: §1910.178(l).] operator training: §1910.178(l).]
When a forklift / telescopic handler is configured and used When a forklift / telescopic handler is configured and used for hoisting, the employer must ensure that: for hoisting, the employer must ensure that:
1. 1. Forklift, Forklift, lift lift equipment equipment and and rigging rigging have have been been inspected inspected (each (each shift, shift, month month and and year) year) and and are are in in
good, safe condition and properly installed. good, safe condition and properly installed.
2. 2. An An operator's operator's manual manual and and applicable applicable load load charts charts are are on on the the forklift. forklift.
3. 3. Work Work zone zone ground ground conditions conditions can can support support the the equipment equipment and and load. load. Any Any hazardous hazardous conditions conditions in in the the
work area work area have been identified, and the operator notified. have been identified, and the operator notified.
4. 4. Equipment Equipment is is being being used used within within its its rated rated capacity capacity and and in in accordance accordance with with the the manufacturer's manufacturer's
instructions. instructions.
WARNING WARNING
5. 5. Operator Operator and and crew crew members members have have been been trained trained in in the the safe safe use use and and operation operation of of the the equipment, equipment,
including how to avoid electrocution including how to avoid electrocution
https://www.forkliftpdfmanuals.com/