Manitou MLT625-75 H S1-E3, Руководство оператора

Страница: 103 / 160

3-1 3-1 7 7
B7 B7
3 3
B6/2 B6/2
5 5
3 3
4 4
2 2
1 1
3 3
2 2
B6/1 B6/1
2 2
1 1
1 1
p p p p
- - Check visually tha Check visually tha t there is no leakage in t there is no leakage in the tank and pipes. the tank and pipes.
Always maintain the oil level at maximum as cooling depends on the oil flowing through Always maintain the oil level at maximum as cooling depends on the oil flowing through
the tank. the tank.
B6 - BRAKE OIL LEVEL B6 - BRAKE OIL LEVEL
CHECK CHECK
Place the lift truck on level ground. Place the lift truck on level ground.
- - Loosen the two knurled screws 1 ( Loosen the two knurled screws 1 ( fig. B6/1) and remove th fig. B6/1) and remove th e protective cover 2 e protective cover 2
(fig. B6/1). (fig. B6/1).
- - Check tank 3 (fig. B6/2). The correct level must stand at the MA Check tank 3 (fig. B6/2). The correct level must stand at the MA X level in the tank. X level in the tank.
- - If necessary, add oil (see: 3 - MAINTENA If necessary, add oil (see: 3 - MAINTENA NCE: LUBRICANTS A NCE: LUBRICANTS A ND FUEL). ND FUEL).
- - Remo Remo ve cap 4 (fig. B ve cap 4 (fig. B 6/2). 6/2).
- - Add oil t Add oil t hrough filler port 5 (fig. hrough filler port 5 (fig. B6/2). B6/2).
- - Repla Repla ce th ce th e cap e cap . .
- - Check visually tha Check visually tha t there is no leakage in t there is no leakage in the tank and pipes. the tank and pipes.
If the braking oil level is abnormally low, consult your dealer. If the braking oil level is abnormally low, consult your dealer.
B7 - WINDSCREEN WASHER LIQUID LEVEL B7 - WINDSCREEN WASHER LIQUID LEVEL
CHECK CHECK
- Open the I.C. engine bonnet. - Open the I.C. engine bonnet.
- - Remo Remo ve cap 1 (fi ve cap 1 (fi g. B7). g. B7).
- - Visually check th Visually check th e level in tank 2 ( e level in tank 2 ( fig. B7). fig. B7).
- - If necessary add windscreen washer liquid (see: If necessary add windscreen washer liquid (see: 3 - MAINTENANCE: 3 - MAINTENANCE: LUBRICANTS LUBRICANTS
AND FUEL) through filler port 3 (fig. B7). AND FUEL) through filler port 3 (fig. B7).
- - Repla Repla ce th ce th e cap e cap . .
B8 - CAB VENTILATION FILTER B8 - CAB VENTILATION FILTER
CLEAN CLEAN
- Lift out cabin ventilation filter 1 (fig. B8). - Lift out cabin ventilation filter 1 (fig. B8).
- Clean the filter with a compressed air jet. - Clean the filter with a compressed air jet.
- - Check its condition and change if necessary (see: 3 - MAINTENANCE: FIL Check its condition and change if necessary (see: 3 - MAINTENANCE: FIL TERS CARTRIDGES TERS CARTRIDGES
AND BELTS). AND BELTS).
- Put the filter back into place. - Put the filter back into place.
B8 B8
1 1
https://www.forkliftpdfmanuals.com/