Mamiya 645 AFD III, Инструкция по эксплуатации

Страница: 24 / 68

Loading Film in the Magazine
Film can be loaded into the magazine whether it is attached to the camera
or not.
1. Open the magazine's Back Cover.
Simultaneously push down button (A)
while pressing button (B) in.
2. Remove the Roll Film Insert.
Squeeze the center "645" block be-
tween your finders, and then pull
out the insert.
When you load film for the first time,
remove and discard the protective
paper cover that is attached to the
film rails in the magazine.
3. Set the film type (120 or 220).
Push and hold the Pressure Shaft (D)
so that the Pressure Plate may be set
to the film type.
Be sure to align the Lock Pins with the holes in the Pressure Plate.
The film type should be displayed on the magazine's LCD Panel
when the insert is loaded into the magazine.
When the Pressure Plate is erroneously set:
21