Malibu Boats RESPONSE TXi 2021, Руководство пользователя

Страница: 187 / 202

2021 OWNER’S MANUAL | Warranty 165
Troubleshooting the Boat
General
The boat will not start.
• Verify that the battery switch is ON.
• Be certain the Emergency Safety Stop Switch is attached
to the connection point on the driver’s panel and to the
boat operator.
• Be certain the engine electrical system is ON. Generally,
this requires turning the ignition key ON or pressing the
ON button.
• It is possible the display is in a “sleep” mode. Press a
key or touch the screen to see if the affected display
activates.
• Verify that the battery connections are secure.
• Refer to the Engine section of this manual for additional
suggestions.
The boat will not shift into gear.
• When engaging the transmission from neutral either
forward or backward into reverse, pull up on the safety
collar located directly below the throttle lever knob. The
safety collar helps avoid unintentional movement into
gear.
• When shifting gears, always do so smoothly and briskly.
Being either too hard and slamming the gears, or too
tentative is hard on the shifter/throttle system and can
result in damage that is not covered under warranty.
The engine/drive train is not operating properly.
• Refer first to the engine manual or the Engine section of this
manual for guidance.
• Check the fuel level in the boat to be certain that the engine
is not “starving” from lack of fuel or contaminated fuel.
• Check for engine warning messages on the gauges/display.
If any are present, take the boat to the closest authorized
Malibu dealer for evaluation and repair.
Gauges, Switches and Video Screens
A gauge or video screen does not light up and work as
expected.
• Be certain the engine electrical system is ON. Generally,
this requires turning the ignition key ON or pressing the
ON button.
• It is possible the display is in a “sleep” mode. Press a
key or touch the screen to see if the affected display
activates.
• Verify that the battery connections are secure.
• Determine if other gauges, switches and/or video screens
are operational. If they are, check the circuit breaker
panel to determine if the breaker has tripped. Reset. If
the circuit continues to trip, the boat must be serviced by
an authorized Malibu dealer as it indicates a recurrent and
potentially significant problem. Another cause is a loose
electrical connection to the non-working gauge/switch/
video screen. This matter should be addressed by an
authorized Malibu dealer.
• If a video screen freezes or displays an unreadable or
invalid screen, turn the entire system OFF, including the
engine electrical system. Allow a few minutes for the